fabulousmili.blogg.se - The spiral staircase

The spiral staircase full#
The spiral staircase plus#
The spiral staircase download#

Change to 3D mode to view the spiral staircase in 3D view (press 3 or select the 3D button ( ) in the bottom right.To remove the staircase wall, open the Staircase Wall Properties dialog, and in the Wall Type field, select Missing (end to end).To remove the supporting material (such as walls) beneath the risers, in the Open field in the Staircase preferences, select Yes.You have successfully added a spiral staircase! However, you may now need to make some additional adjustments so your Sketch matches the actual structure. In the Riser Height field, enter the height of the risers.of risers field, enter the number of risers on the staircase. Press Shift and drag the crosshairs back to the intersection of the angle.Select the red diamond in the center of the plus, and drag it off the stairs to make the treads appear.

The spiral staircase plus#

Select the stairs again and zoom in so you can see the large blue plus sign (the intersection of the angle).

Your stair treads will look like they disappeared.

In the Staircase group, in the Angled Treads box, select Yes.

Select the stairs and open the Staircase Properties ( ).

If Xactimate is measuring the diameter from inside the open angle instead of from the outer circle, you can create a reference line that is the equal to the width of the stairs and have it go from the inner vertex towards the white box to help you get the diameter exact.

Adjust the inner and the outer diamonds (using Shift, click, and drag) until the angle of the bottom to top stair is accurate and the widths are correct.If either width is incorrect, select the inner vertex’s red diamond, press and hold Shift, and select and drag the diamond to adjust the position until both widths are correct. Select the stairs and confirm that the width on each side of the opening is correct.Drag it around to create an inverted triangle with the other vertex (red diamond).Click and hold the vertex (the red diamond) on the top end of the stair wall.The arc should be at least twice the width of the stairs. Select the white box on the wall, and drag it out to create an arc.In the General group, in the Arced Wall box, select Yes.Open the Staircase Wall properties by either double-clicking the stair wall or selecting the stair wall and selecting the Properties icon ( ) that appears.Select the remaining wall and drag it to resize the stairs to the correct width.Select the vertices (indicated by red diamonds) on the top and bottom of the wall that will be the center of the spiral, and drag them to the middle (one at a time).Select the wall at the top of the stairs, and press Delete.(If you use the Custom staircase, delete the added landing.) In Sketch, select Staircase and add a staircase that is 6 feet 8 inches long.

The spiral staircase download#

To view the instructions, go to Download a template from the Online Sketch Gallery.

The spiral staircase full#

If this is a typical stair with a full degree of rotation of 270 degrees, you can instead import and use the spiral staircase template. The degree the stairs rotate (for instance, does it create a full circle?).Before you begin, you will need three pieces of information: